A Brutally Honest Breakdown of Sex Dolls Right Now- Start Here

[FrankJScott]

DISCOVER BEST SEX DOLL FEET GUIDE NOW

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Think of standing feet as a feature nobody thinks about until they need it, when the difference proves huge. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Get to grips with the difference before you order and you've taken one of the simplest steps towards evading a frustrating purchase.
 
Standing Upright Without Support
The difference comes down to something uncomplicated. Standing feet come with metal bolts embedded in the soles, and these allow the doll to stand upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.
 
Full-Length Poses Without Visible Supports
It's standing feet that photography and display can't do without. Full-length poses without noticeable supports, and display anywhere that requires her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. That's the primary reason most photographers specify standing feet when ordering: it opens up a wide range of poses and settings that non-standing feet can't manage.
 
Standing Feet Are Also Essential for Showers
Showering is another case where standing feet are vital. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and hazardous. In a wet environment the standing feet give her stability, while the metal bolts make sure that the feet don't absorb water the way non-standing feet would. This is a real safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.
 
Why Shower Use Destroys So Many Dolls
Shower use deserves more detail, being the source of a lot of damaged dolls. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. Once it starts, the rusting of the metal skeleton inside the leg by the water is basically unfixable, though it takes weeks or months to become evident. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in anyway of your precautions, no matter how attentive you are.
 
A Storage Option for Display-Minded Buyers
Standing feet can make storage easier as well, depending on the setup. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Display rather than concealing her away is something this suits well, and it's space-efficient for customers who don't have room for a hanging setup. Some buyers prefer the visible, accessible storage that the standing feet make possible.
 
What Standing Feet Cost
A drawback of standing feet: they're a little more expensive and marginally heavier. Expect the price to be a few percent higher than a doll with non-standing feet, as the metal bolts add a small quantity of weight and the manufacturing process is more involved. Though the difference is small and it's usually worth the extra cost, knowing about it matters if you're purchasing on an incredibly tight budget.
 
Closed Shoes Hide the Bolts
Another drawback is that the bolts can become evident if the feet are bare. High-heeled shoes or open-toed footwear on a doll can leave the bolts visible in photos, which some buyers find distracting. This slight aesthetic issue is readily solved by covering the feet with closed shoes or by picking footwear that hides the bolts; it's no reason to stay away from standing feet totally.
 
Fine for Bed-Only Dolls
Non-standing feet cost less and weigh less, and they suit buyers who only want to use the doll in bed and won't display her standing or shower with her. Non-standing feet are perfectly adequate if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. Buyers who know what they want can make this choice completely validly.
 
Softness as a Selling Point
Some purchasers find non-standing feet more comfortable to touch, being somewhat softer and more pliable. The difference is subtle and not generally enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.
 
A Common and Costly Mistake
Buyers at times forget what kind of feet they have and attempt to stand the doll in any case, which is the big risk with non-standing feet. This typical error causes real damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. When you acquire non-standing feet, remember what they are and don't be tempted to test their limits.
 
New Hardware Rarely Works as Well
Then there's the question of whether standing feet can be retrofitted to a doll without them. The short answer is that it can't readily be done. Because the bolts are embedded in the soles during manufacturing, adding them subsequently means cutting into the feet and installing new hardware, an expensive process that regularly doesn't work as well as the original. You might want them later if you're considering buying a doll without standing feet; in that case, it's better to acquire a doll with standing feet in the first place than to try to add them later.
 
Which Feet Should You Order?
Picking between standing and non-standing feet? The sensible advice is simple. You'll need standing feet for photographing the doll, displaying her standing, or using her in the shower. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly adequate. Undecided customers are safer with standing feet, which restrict nothing and justify their small extra cost.
 
A 45kg Male Doll That Can't Stand
We should mention a gender consideration as well. Male dolls tend to advantage more than female dolls from standing feet, as they're heavier and more tough to store in any other way. Stored lying down, which puts pressure on the body and needs more space, is how a 45kg male doll that can't stand has to be kept. It's a real advantage for buyers who don't have a lot of room that standing feet let male dolls store upright.
 
A Trade-Off That Matters for Barefoot Photos
The aesthetic difference between standing and non-standing feet is worth a final note. Because of the bolts, standing feet are slightly harder at the bottom, which can be apparent when the doll is barefoot. On dolls with delicate features in particular, some buyers find this less aesthetically gratifying, as the hard soles look a little industrial. Softness and a natural look are what non-standing feet offer, and some purchasers prefer them. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.
 
Non-Standing Feet Are Lower-Maintenance
There's a maintenance angle as well that's worth considering. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the appropriate tool. No hardware means nothing to come loose, so non-standing feet don't have this issue and are marginally lower-maintenance in the long run.
 
Stability Depends on the Surface
Different surfaces change how the doll stands, thanks to the bolts. Carpet suits the bolts, which grip well, leaving the doll constant. Additional support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a smooth floor. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to avoid sliding. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.
 
Barefoot Photos and Exact Proportions
A final consideration is frequently overlooked: how standing feet influence the doll's overall proportions. Barefoot photos can look slightly different because the bolts add a small quantity of length to the foot. It's a subtle effect that's ordinarily invisible in shoes, yet worth knowing about for barefoot photography when you care about precise proportions. Marginally shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.
 
Bed-Only Dolls Don't Need Them
Bottom line: for most purchasers standing feet are worth the extra cost, opening up posing, display, storage and shower choices that non-standing feet don't. Buyers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out discover more and don't forget go and click for more.

CHECK OUT THE BEST SEX DOLL GUIDE ONLINE