A Quick Overview of Sex Dolls Right Now- Read Before You Buy

[FrankJScott]

VIEW BEST SEX DOLL FEET ADVICE HERE

Standing Feet Vs Non-Standing Feet Explained: Which Should You Choose
Standing feet are one of those features that purchasers don't think about until they need them, and then they discover the difference is huge. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Knowing the difference before you order is among the simplest ways to dodge an irritating purchase.
 
The Basic Difference Between Standing and Non-Standing Feet
Uncomplicated is the basic difference. Standing feet have metal bolts embedded in the soles, which allow the doll to stand upright without support. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. The key is the bolts, and everything else follows from whether they're there.
 
Full-Length Poses Without Visible Supports
Standing feet are a must for photography and display. With a doll that can stand unaided you get full-length poses without evident supports and display in a corner, a doorway, or anywhere else that requires her to be upright. Most photographers specify standing feet when ordering for this chief reason: it opens up a wide range of poses and settings that aren't possible with non-standing feet.
 
Water Absorption Leads to Rust
For shower use too, standing feet are essential. If you want to shower with your doll, she needs to be able to stand, because lying her down in a shower is both impractical and unsafe. The metal bolts make sure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. The real safety consideration is that water absorption in non-standing feet can lead to rust and eventual structural failure.
 
The Source of a Lot of Damaged Dolls
Let's expand on shower use, because a lot of damaged dolls start there. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become visible but is fundamentally unfixable once it starts. Showers and non-standing feet don't mix, no matter how careful you are, as the water will find its way in anyway of your precautions.
 
Storing Her Standing Up
Standing feet are also easier to store in some setups. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. For customers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a decent option. Some buyers prefer the apparent, accessible storage that the standing feet make possible.
 
Is the Premium Worth Paying?
The disadvantage of standing feet is that they're a little more expensive and marginally heavier. Price-wise, a doll with standing feet is normally a few percent higher than one with non-standing feet; the metal bolts add a small quantity of weight and manufacturing is more involved. If you're buying on a very tight budget, know that the difference is small and it's typically worth the additional cost.
 
High Heels and Open-Toed Footwear
Another downside is that the bolts can become noticeable if the feet are bare. On a doll with high-heeled shoes or open-toed footwear, the bolts might be noticeable in photos, which some buyers find distracting. Steering clear of standing feet entirely over this would be unnecessary; it's a minor aesthetic issue that closed shoes, or footwear that hides the bolts, will solve.
 
A Completely Valid Choice
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. For a doll who'll chiefly be on a bed or sofa, perfectly acceptable non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. Totally valid is this choice for purchasers who know what they want.
 
What Non-Standing Feet Feel Like
Non-standing feet are also a little softer and more elastic, which some purchasers find more comfortable to touch. A subtle difference, not normally enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.
 
Remember They're Non-Standing
Non-standing feet carry a large risk, which is buyers forgetting what kind of feet they have and trying to stand the doll anyway. Genuine damage comes of this usual mistake, as the foam inside the ankle can't take the doll's weight and will tear or collapse. The result is a doll that can no longer stand even if you try to support her, because the feet have been permanently damaged. Keep in mind that non-standing feet are non-standing, if that's what you're buying, and don't be tempted to test their limits.
 
Why Retrofitting Doesn't Work Well
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. The short answer is no, not easily. Manufacturing is when the bolts get embedded in the soles; subsequently, you'd have to cut into the feet and install new hardware, which is costly and often doesn't work as well as the original. Attempting to add standing feet later is worse than purchasing a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, acquire them first.
 
Sensible Advice by Use Case
If you're choosing between standing and non-standing feet, the useful advice is uncomplicated. You'll need standing feet for photographing the doll, displaying her standing, or using her in the shower. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly enough. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small additional cost is worth it.
 
Upright Storage for Male Dolls
It's worth mentioning a gender consideration too. More than female dolls, male dolls normally upside from standing feet, being heavier and more tough to store in any other way. There's no alternative but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and requires more space. Male dolls can store upright with standing feet, which is a real upside for customers who don't have a lot of room.
 
Apparent Hardness at the Bottom
The aesthetic difference between standing and non-standing feet is worth a final note. The bolts make standing feet a little harder at the bottom, and this can be apparent when the doll is barefoot. Some customers find this less aesthetically satisfying, particularly on dolls with fragile features, because the hard soles look slightly industrial. Softness and a natural look are what non-standing feet offer, and some purchasers prefer them. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.
 
Tighten With the Appropriate Tool
There's a maintenance angle as well that's worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Tighten the bolts with the appropriate tool if they feel loose when you check them every few months by gently twisting. There's no hardware to come loose with non-standing feet, so they don't have this issue and are slightly lower-maintenance in the long run.
 
Stopping Sliding
Standing on distinct surfaces is also influenced by the bolts. The bolts grip well on carpet, so the doll is stable. The doll may need additional support to stay upright on hard flooring, where the bolts can slip, particularly if the floor is smooth. Sliding is stopped on a hard surface by a small mat or a grippy pad under the feet, which you should consider. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.
 
An Overlooked Detail: Proportions
Ultimately, there's something that's regularly overlooked: how standing feet affect the doll's overall proportions. The bolts add a small quantity of length to the foot, which can slightly change the way the doll looks in barefoot photos. You probably won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about exact proportions. Because they don't have the bolts, non-standing feet don't have this effect, and so are slightly shorter and more natural-looking.
 
One of the Simplest Upgrades to Justify
The additional cost of standing feet is worth it for most buyers, because they open up posing, display, storage and shower options that non-standing feet don't; that's the bottom line. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should pick standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this A Straight-Up Word on Modern Sex Dolls- What Actually Matters 9872e91  which is worth considering with A Straight-Up Primer on Modern Sex Dolls- What You Need to Know and A Quick Rundown of Sex Dolls Right Now- Before You Spend a Penny. Also check out this link bearing in mind he said and a knockout post for more.

CHECK OUT THE BEST SEX DOLL GUIDE ONLINE