The Real Deep Dive Into Sex Dolls- What to Expect

[FrankJScott]

CLICK FOR THE BEST SEX DOLL FEET ADVICE NOW

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Standing feet are the sort of feature people ignore until they need them; after that, they find the difference huge. On the spec sheet it looks trivial, yet it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. If you grasp the difference before you order, you've avoided an irritating purchase in one of the simplest ways there is.
 
Bolts or No Bolts
The basic difference is straightforward. Metal bolts embedded in the soles of standing feet allow the doll to stand upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.
 
A Wider Range of Poses and Settings
Standing feet are a must for photography and display. A doll who can stand unaided can be photographed in full-length poses without visible supports and displayed in a corner, a doorway, or wherever else she needs to be upright. The principal reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.
 
Lying Her Down in a Shower Is Impractical and Dangerous
Standing feet are also essential for shower use. Standing is the only reasonable way to shower with your doll, because lying her down in a shower is impractical and risky. The standing feet give her stability in a wet environment, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. Structural failure finally, and rust, can come from water absorption in non-standing feet; that's why this is a real safety consideration.
 
Basically Unfixable Once It Starts
Expanding on the shower use point is rewarding; it's the source of a lot of damaged dolls. There's foam or filler material inside the ankle with non-standing feet, and it absorbs water when it gets wet. Basically unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become evident. Because the water will find its way in regardless of your precautions, a doll with non-standing feet should never be in the shower, no matter how diligent you are.
 
Standing Storage Explained
In some setups, standing feet also make storage easier. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. For customers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a decent option. The doll can be stored in a way that's evident and accessible thanks to the standing feet, and some customers prefer this.
 
The Disadvantage: A little Pricier and Heavier
The downside of standing feet is that they're slightly more expensive and a little heavier. Metal bolts add a small quantity of weight to the doll. Manufacturing is also more involved. The upshot is a cost that's generally a few percent higher than a doll with non-standing feet. Buying on a really tight budget? The difference is small and typically worth the additional cost, but it's worth knowing about.
 
Picking Footwear That Conceals Them
Bare feet can make the bolts evident, which is the other drawback. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some customers find this distracting. Closed shoes or footwear that conceals the bolts solve this slight aesthetic issue, so it's not a reason to avoid standing feet entirely.
 
A Doll for the Bed or Sofa
They're cheaper and lighter, and non-standing feet are fine for buyers who only want to use the doll in bed and don't plan to display her standing or shower with her. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly enough and leave money for upgrades like articulated hands or a better wig. It's a completely valid choice if you know what you want.
 
A Subtle Difference
More comfortable to touch, for some customers, are non-standing feet, which are somewhat softer and more elastic. It's worth knowing about if you're specifically looking for maximum softness, though this is a subtle difference and not ordinarily enough to justify the choice on its own. The feet on non-standing dolls feel less like they have a hard core inside them, and more like the rest of the doll.
 
Attempting to Stand the Doll Anyway
Forgetting what kind of feet they have, purchasers try to stand the doll in any case, and that's the huge risk with non-standing feet. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this usual slip-up causes genuine damage. The result is a doll that can no longer stand even if you try to support her, because the feet have been permanently damaged. Keep in mind that non-standing feet are non-standing, if that's what you're acquiring, and don't be tempted to test their limits.
 
New Hardware Rarely Works as Well
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. No, not easily, is the short answer. The original bolts are embedded in the soles during manufacturing, and a subsequently addition requires cutting into the feet and installing new hardware, which is expensive and often not as decent. Better than attempting to add them later is purchasing a doll with standing feet in the first place, if you're considering a doll without them and think you might want them later.
 
The Safer Option
There's simple practical advice for customers choosing between standing and non-standing feet. You'll need standing feet for photographing the doll, displaying her standing, or utilising her in the shower. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly sufficient. When in doubt, standing feet win, since they leave every alternative open and cost only a little more.
 
Heavier Dolls Are Harder to Store
One more thing worth mentioning: a gender consideration. Male dolls normally upside from standing feet more than female dolls, because they're heavier and more difficult to store in any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. Customers who don't have a lot of room get a genuine benefit from standing feet, which give male dolls the ability to store upright.
 
Weighing Looks Against Function
There's a final note to make on the aesthetic difference between standing and non-standing feet. On standing feet the bottom is a little harder thanks to the bolts, and that can show when the doll is barefoot. Hard soles look marginally industrial, which some buyers find less aesthetically gratifying, especially on dolls with delicate features. Softer and more natural-looking, non-standing feet are preferred by some buyers. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.
 
Check Every Few Months by Gently Twisting
Maintenance is another angle that's worth considering. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out entirely the doll can collapse. Tighten the bolts with the suitable tool if they feel loose when you check them every few months by gently twisting. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're a little lower-maintenance in the long run.
 
Grip and Stability
The bolts also influence how the doll stands on distinct surfaces. Carpet suits the bolts, which grip well, leaving the doll stable. Particularly if the floor is silky, the bolts can slip on hard flooring, and the doll may need extra support to stay upright. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it stops sliding. A doll with non-standing feet isn't standing in the first place, so the issue doesn't arise; for standing feet on a hard floor, it's worth knowing about.
 
A Subtle Effect on Appearance
How standing feet influence the doll's overall proportions is a final consideration that's regularly overlooked. Because the bolts add a small quantity of length to the foot, the doll can look a little distinct in barefoot photos. This subtle effect, normally invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about specific proportions. With non-standing feet there are no bolts, so no such effect, and the feet are slightly shorter and more natural-looking.
 
The Bottom Line: Standing Feet Are Worth It
Posing, display, storage and shower choices that non-standing feet don't offer are opened up by standing feet, and the bottom line is that they're worth the additional cost for most customers. Only customers certain that the doll will stay in bed, never displayed or photographed standing, should skip them. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out find out here now as well as click now and you can try here for more.

CHECK OUT THE BEST SEX DOLL GUIDE ONLINE