My Community

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Purchasers rarely think about standing feet before they need them, and once they do, the difference turns out to be gigantic. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Understanding the difference before you order is one of the simplest ways to stay away from an annoying purchase.
 
What Makes a Foot a Standing Foot
There's a straightforward basic difference. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. Damage to the feet is the result of trying to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. Are the bolts there or not? That's the key, and everything else follows from it.
 
Important for Photography and Display
Photography and display are where standing feet are vital. A doll that can stand unaided can be photographed in full-length poses without evident supports, and can be displayed in a corner, a doorway, or anywhere else that needs her to be upright. With standing feet, a wide range of poses and settings opens up that non-standing feet can't match; it's the primary reason most photographers specify them when ordering.
 
Why Showers Demand Standing Feet
Shower use makes standing feet essential too. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as risky. Standing feet make her steady in a wet environment, and with the metal bolts the feet don't absorb water as non-standing feet would. This is a genuine safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.
 
Water Rusts the Metal Skeleton
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. Water rusting the metal skeleton inside the leg takes weeks or months to become noticeable, yet once it starts it's essentially unfixable. Anyway of your precautions, the water will find its way in, which is why a doll with non-standing feet should never be in the shower however diligent you are.
 
When You Lack Room for a Hanging Setup
Storage is easier with standing feet in some setups. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Customers who don't have room for a hanging setup will find this a space-efficient alternative, and it suits purchasers who want to display the doll rather than keep her hidden. Some buyers prefer the evident, accessible storage that the standing feet make possible.
 
Incredibly Tight Budgets and Standing Feet
Standing feet cost slightly more and weigh marginally more, and that's the downside. The metal bolts add a small amount of weight to the doll, and the manufacturing process is more involved, so the price is ordinarily a few percent higher than a doll with non-standing feet. Though the difference is small and it's ordinarily worth the extra cost, knowing about it matters if you're buying on a really tight budget.
 
Distracting in Photos
The bolts can show if the feet are bare, which is the other downside. Some customers are distracted when the bolts are apparent in photos of a doll in high-heeled shoes or open-toed footwear. The trivial aesthetic issue goes away with closed shoes or footwear that conceals the bolts, which means it's not a reason to avoid standing feet entirely.
 
Fine for Bed-Only Dolls
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Non-standing feet are perfectly enough if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. This is a totally valid choice for purchasers who know what they want.
 
Softer, More Flexible Feet
A little softer and more elastic, non-standing feet are more comfortable to touch for some customers. You won't generally pick on this alone, as it's a subtle difference, but it's worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.
 
A Common and Costly Mistake
Customers sometimes forget what kind of feet they have and attempt to stand the doll regardless, which is the big risk with non-standing feet. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a usual slip-up. The result is a doll that can no longer stand even if you attempt to support her, because the feet have been permanently damaged. Don't be tempted to test their limits if you're purchasing non-standing feet; remember that they're non-standing.
 
Why Retrofitting Doesn't Work Well
Another question is whether standing feet can be retrofitted to a doll that doesn't have them. The short answer is that it can't easily be done. Because the bolts are embedded in the soles during manufacturing, adding them subsequently means cutting into the feet and installing new hardware, a costly process that often doesn't work as well as the original. Thinking of acquiring a doll without standing feet, but might want them later? Better to purchase a doll with standing feet in the first place than to try to add them later.
 
Which Feet Should You Order?
For customers who are choosing between standing and non-standing feet, the functional advice is straightforward. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly adequate. For the uncertain, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small additional cost.
 
Heavier Dolls Are Harder to Store
A gender consideration deserves a mention as well. Male dolls are heavier and harder to store in any other way, so they generally upside from standing feet more than female dolls. There's no option but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and needs more space. A real advantage for buyers who don't have a lot of room is that standing feet give male dolls the ability to store upright.
 
Barefoot Photography Priorities
There's a final note to make on the aesthetic difference between standing and non-standing feet. On standing feet the bottom is marginally harder thanks to the bolts, and that can show when the doll is barefoot. Dolls with delicate features particularly suffer, some buyers feel, because the hard soles look somewhat industrial and less aesthetically satisfying. Non-standing feet look softer and more natural, and some customers prefer that. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.
 
A Bolt That Falls Out Can Make the Doll Collapse
There's also a maintenance angle that's worth considering. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out completely and the doll collapsing, with a loose one damaging the foot or ankle on the way there. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the fitting tool. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them marginally lower-maintenance in the long run.
 
How the Bolts Behave on Different Surfaces
Different surfaces change how the doll stands, thanks to the bolts. On carpet, the doll is steady, the bolts gripping well. Slipping bolts on hard flooring, especially if the floor is silky, can mean the doll needs extra support to stay upright. Putting a small mat or a grippy pad under the feet is worth considering on a hard surface, as it prevents sliding. A doll with non-standing feet isn't standing in the first place, so the issue doesn't arise; for standing feet on a hard floor, it's worth knowing about.
 
An Overlooked Detail: Proportions
A final, frequently overlooked, consideration is the effect of standing feet on the doll's overall proportions. The way the doll looks in barefoot photos can somewhat change, as the bolts add a small amount of length to the foot. It's a subtle effect that's generally invisible in shoes, yet worth knowing about for barefoot photography when you care about specific proportions. Non-standing feet lack the bolts and hence this effect, leaving the feet marginally shorter and more natural-looking.
 
One of the Simplest Upgrades to Justify
The additional cost of standing feet is worth it for most customers, because they open up posing, display, storage and shower choices that non-standing feet don't; that's the bottom line. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this rosslink. Also check out  visit here (http://forum.dcm-works.net/viewtopic.php?t=12024) not forgetting sites such as  visit site (http://ahtop.top/showthread.php?tid=500) and  useful source (https://www.registrofiatbarchetta.com/viewtopic.php?f=1&t=2113803) for more.