My Community

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
Nobody gives standing feet a reflection until the day they need them, and that's when the massive difference becomes obvious. Everything from what you can do with the doll to how she stores, photographs and wears over time shifts because of this small detail on the spec sheet. Before you order, understand the difference, which is one of the simplest ways to stay away from an irritating purchase.
 
Bolts or No Bolts
The core difference is a straightforward one. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.
 
Corners, Doorways and Anywhere Upright
Crucial for photography and display: standing feet. Anywhere that requires her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without apparent supports. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the primary reason most photographers specify standing feet when ordering.
 
A Real Safety Consideration
There's shower use as well, which makes standing feet critical. Lying her down in a shower is impractical and dangerous, so showering with your doll means she needs to stand. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. Structural failure in the end, and rust, can come from water absorption in non-standing feet; that's why this is a genuine safety consideration.
 
Fundamentally Unfixable Once It Starts
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes evident, and it's basically unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in regardless of your precautions, no matter how careful you are.
 
No Hanging Hook or Storage Case Needed
There's also easier storage with standing feet in some setups. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. Space-efficient, this suits purchasers who don't have room for a hanging setup, and it's great for purchasers who want to display the doll rather than keep her hidden. Evident and accessible storage is made possible by the standing feet, which some buyers prefer.
 
A More Involved Manufacturing Process
The disadvantage of standing feet is that they're somewhat more costly and slightly heavier. A few percent extra on the cost is normal compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. It's worth knowing about if you're buying on a very tight budget, though the difference is small and normally worth the additional cost.
 
Not a Reason to Avoid Standing Feet
The other disadvantage is that the bolts can become noticeable if the feet are bare. Some buyers find it distracting that the bolts might be apparent in photos on a doll with high-heeled shoes or open-toed footwear. You can solve this small aesthetic issue by covering the feet with closed shoes or selecting footwear that hides the bolts, so don't stay away from standing feet completely because of it.
 
Putting the Savings Elsewhere
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly acceptable when the doll will chiefly be in a bed or on a sofa. It's an entirely valid choice if you know what you want.
 
Maximum Softness
Non-standing feet are somewhat softer and more elastic too, and some buyers find that more comfortable to touch. This is a subtle difference, and it's not ordinarily enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.
 
Attempting to Stand the Doll Anyway
With non-standing feet the sizable risk is customers forgetting what kind of feet they have, then attempting to stand the doll regardless. It's a widespread oversight with genuine results, since the foam inside the ankle can't support the doll's weight and will tear or collapse. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're acquiring them.
 
New Hardware Rarely Works as Well
And what about retrofitting standing feet to a doll that doesn't have them? In short, no, not easily. Cutting into the feet and installing new hardware is what adding the bolts subsequently needs, which is costly and regularly doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. Thinking of purchasing a doll without standing feet, but might want them later? Better to acquire a doll with standing feet in the first place than to try to add them later.
 
The Safer Option
There's uncomplicated useful advice for buyers selecting between standing and non-standing feet. Photographing the doll, displaying her standing, or using her in the shower? Then you need standing feet. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly adequate. Not sure? Opt for standing feet: nothing is off the table with them, and the small additional cost is worth paying.
 
Pressure on the Body When Lying Down
Another consideration worth mentioning concerns gender. Standing feet upside male dolls more than female dolls in general, as they're heavier and harder to store any other way. Storage lying down, which puts pressure on the body and needs more space, is the only alternative for a 45kg male doll that can't stand. A genuine advantage for customers who don't have a lot of room is that standing feet give male dolls the ability to store upright.
 
Weighing Looks Against Function
Ultimately, the aesthetic difference between standing and non-standing feet is worth noting. The bolts make standing feet somewhat harder at the bottom, and this can be evident when the doll is barefoot. The hard soles look marginally industrial, so some purchasers find this less aesthetically satisfying, especially on dolls with fragile features. Non-standing feet look softer and more natural, and some purchasers prefer that. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.
 
The Maintenance Angle
There's also a maintenance angle that's worth considering. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Every few months, give the bolts a soft twist to check them, and tighten them with the suitable tool if they feel loose. Non-standing feet escape this issue because there's no hardware to come loose, which makes them slightly lower-maintenance long term.
 
How the Bolts Behave on Different Surfaces
The bolts also affect how the doll stands on distinct surfaces. With carpet, the bolts grip well and the doll is stable. Particularly if the floor is smooth, the bolts can slip on hard flooring, and the doll may need additional support to stay upright. Sliding on a hard surface? A small mat or grippy pad under the feet stops it. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.
 
More Natural-Looking Without the Bolts
Often overlooked, there's a final consideration in how standing feet affect the doll's overall proportions. Barefoot photos can look marginally different because the bolts add a small amount of length to the foot. Subtle as the effect is, and usually invisible in shoes, it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. Non-standing feet lack the bolts and thus this effect, leaving the feet a little shorter and more natural-looking.
 
What Standing Feet Open Up
The extra cost of standing feet is worth it for most buyers, because they open up posing, display, storage and shower options that non-standing feet don't; that's the bottom line. The exception is the buyer who's certain the doll will only be used in bed and won't be displayed or photographed standing. For the rest of purchasers, standing feet are the better choice, and rank among the simplest upgrades to justify. More info at this rosslink. Also check out  try these out (http://guitarproof.free.fr/phpBB/viewtopic.php?p=2830) which is worth considering with  check my source (https://fitnessnationforum.com/viewtopic.php?t=1931) not to mention  these details (https://zivotkostelecnadlabem.cz/viewtopic.php?t=622) together with  here are the findings (http://crewride.com/forum/viewtopic.php?p=644474) alongside all  click site (https://pari-ot-internet.com/viewtopic.php?t=5766) alongside all  site link (https://kollaboratsia.com.ua/index.php?topic=85.new) and don't forget  you can look here (https://fitnessnationforum.com/viewtopic.php?t=1202) alongside all  read more here (https://codeplugs.com/forums/showthread.php?tid=1419) not to mention  description (http://crewride.com/forum/viewtopic.php?p=643493) and  go here (https://dreamstation.site/showthread.php?tid=5127) for more.